09
Jan
Peru used three cores of NAYY, NYY, NA2XY, N2XY Cables
Share:
Description
• Application
General use as power cable. In low voltage distribution networks, industrial installations, buildings and operating centers. For fixed installations, in indoor areas (trays, ducts), in underground ducts or buried direct in ground, in dry or wet locations.
• STANDARDS
PRODUCT
NTP-IEC 60228; NTP-IEC 60502-1; IEC 60228; IEC 60502-1
TEST
IEC 60332-1-2; UL 2556; IEC 60811-401; IEC 60811-402; IEC 60811-501; IEC 60811-504;
IEC 60811-505; IEC 60811-506; IEC 60811-508; IEC 60811-509; ICEA S-95-658
• CONSTRUCTION
1. Conductor: Soft copper, class 1 or class 2.
2. Insulation: Compound polyvinyl chloride PVC.
3. Outer sheath: Compound polyvinyl chloride PVC.
4. Tape: Polyester tape.
• MAIN CHARACTERISTICS
Good electrical and mechanical properties. The PVC outer sheath provides an adequate resistance to grease, oils and abrasion. better dissipation of heat allowing a higher current capacity. Flame retardant.
• CROSS SECTION
From 6 mm2 up to 500 mm2.
• COLOUR
Insulation: White.
Outer sheath: Black and white or Black, red and white or Black, red, blue.
• PRODUCT STANDARDS
NTP-IEC 60228: Conductors of insulated cables.
NTP-IEC 60502-1: Power cables with extruded insulation and their accessories for rated voltages from 1 kV and 3 kV.
TANO CABLE with rich manufacturing experience has exported many products to Peru. We are looking for the cooperation with you.
We do OEM service, too. Customize your brand to help improve your repute. We, TANO CABLE, do not only supply the products, but also good service. More information, please visit our website: www.tanocable.es
• Application
General use as power cable. In low voltage distribution networks, industrial installations, buildings and operating centers. For fixed installations, in indoor areas (trays, ducts), in underground ducts or buried direct in ground, in dry or wet locations.
• STANDARDS
PRODUCT
NTP-IEC 60228; NTP-IEC 60502-1; IEC 60228; IEC 60502-1
TEST
IEC 60332-1-2; UL 2556; IEC 60811-401; IEC 60811-402; IEC 60811-501; IEC 60811-504;
IEC 60811-505; IEC 60811-506; IEC 60811-508; IEC 60811-509; ICEA S-95-658
• CONSTRUCTION
1. Conductor: Soft copper, class 1 or class 2.
2. Insulation: Compound polyvinyl chloride PVC.
3. Outer sheath: Compound polyvinyl chloride PVC.
4. Tape: Polyester tape.
• MAIN CHARACTERISTICS
Good electrical and mechanical properties. The PVC outer sheath provides an adequate resistance to grease, oils and abrasion. better dissipation of heat allowing a higher current capacity. Flame retardant.
• CROSS SECTION
From 6 mm2 up to 500 mm2.
• COLOUR
Insulation: White.
Outer sheath: Black and white or Black, red and white or Black, red, blue.
• PRODUCT STANDARDS
NTP-IEC 60228: Conductors of insulated cables.
NTP-IEC 60502-1: Power cables with extruded insulation and their accessories for rated voltages from 1 kV and 3 kV.
TANO CABLE with rich manufacturing experience has exported many products to Peru. We are looking for the cooperation with you.
We do OEM service, too. Customize your brand to help improve your repute. We, TANO CABLE, do not only supply the products, but also good service. More information, please visit our website: www.tanocable.es
Previous article:
Next article:
